Code 711 726 729 723
PAP2T กำหนดไว้ว่าจะใช้ code 711 นี้ก่อน
ถ้าเราอยากใช้ codeอื่น จะมีผลอย่างไรครับ
เช่น code 723 code 729 code 726
แล้ว code711u , code711a ต่างกันอย่างไรครับ
teang เขียน:Code 711 726 729 723
PAP2T กำหนดไว้ว่าจะใช้ code 711 นี้ก่อน
ถ้าเราอยากใช้ codeอื่น จะมีผลอย่างไรครับ
เช่น code 723 code 729 code 726
แล้ว code711u , code711a ต่างกันอย่างไรครับ
teang เขียน:Standard G.729 operates at a bit rate of 8 kbit/s, but there are extensions, which provide rates of 6.4 kbit/s (Annex D, F, H, I, C+) and 11.8 kbit/s (Annex E, G, H, I, C+) for marginally worse and better speech quality, respectively.
G.729 has been extended with various features, commonly designated as G.729a and G.729b.
G.726 is an ITU-T ADPCM speech codec standard covering the transmission of voice at rates of 16, 24, 32, and 40 kbit/s
G.726 also introduced a new 16 kbit/s rate
G.721, which covered ADPCM at 32 kbit/s
G.723, which described ADPCM for 24 and 40 kbit/s.
G.711 encoder will create a 64 kbit/s bitstream for a signal sampled at 8 kHz
ย้อนกลับไปยัง ติดตั้งโทรศัพท์แบบไอพี VoIP ( Voice Over Internet Protocol)
กำลังดูบอร์ดนี้: ไม่มีสมาชิกใหม่ และ บุคคลทั่วไป 60 ท่าน